Prior to use, verify the product arrived in good condition.
Wiring
NOTE: Wiring can vary from board to board. Make sure yo connect it correctly, observing the abbreviations written on the board (PW, DT & GN), according to the color of the wire, as per instructions below.
µMETOS (29-0409)
FIRMWARE: 3.24.20240527 - verify your station has this firmware. To the update, visit Firmware Update µMetos NBIoT (29-0409)
Input: SDI-12
PW: Vcc - brown wire
DT: Data - blue wire
GN: Ground - yellow-green or black wire
SH: Shield - not used
Installation
Watch the video by clicking HERE to ensure the correct installation and the quality of the data.