Test the transmission iScout

Test the transmission iScout 

Connect PC to iScout and plug jumper onto J1 

Open terminal program (TeraTerm or PI Service Terminal) and select the correct Com Port

the menu opens 

========================================================================================
USER: \ MAIN MENU
========================================================================================

(1) SYSTEM
(2) CONTROL UNIT
(3) MODEM
(5) CAMERA
(6)     CAMERA FOCUS

Press Menu (3) MODEM

>> Chosen function: MODEM

========================================================================================
USER: \ MAIN MENU \ MODEM
========================================================================================

(1) MODEM SETTINGS
(2) SEND PHOTO
(3) SEND DATA
(4) GET GPS
(5) GET CONF SMS
(ESC)   BACK

Press (3) SEND DATA and remove the jumper from J1 

>> Chosen function: SEND DATA

========================================================================================
USER: \ MAIN MENU \ MODEM \ SEND SDATA
========================================================================================

The system now starts a transmission, that takes a few minutes.

================================================================

Modem is starting...

Modem found at BAUD rate: 230400
Manufacturer of modem: Sierra Wireless
Type of modem: SL8084TR Product
Modem firmware version: R7.54
IMEI: 352264060195076

Modem ready to use...

================================================================


AT+STSF?

+STSF: 0,"FBEBFFFF7F0B00573E",12,2

OK
AT&F

OK
AT+WIND=0

OK
AT+WOPEN=0
.

.

.

OK
AT+CCID
+CCID: "89423053017024011130"

OK

##################### SIM CARD IS UNLOCKED #####################

= at the SIM card the PIN query is deactivated 

AT+WIND=8
.

.

.

AT+CIMI
295057240301148


############# APN FOUND IN SYSTEM FOR THIS SIM CARD ############

= System has found the APN settings for the SIM card 

AT+WMBS?

.

.

.

OK
AT+COPS=?

+COPS: (2,"A1","A1","23201",2),(1,"A1","A1","23201",0),(1,"3 AT","3 AT","23205",2),(1,"3 AT","3 AT","23205",0),(1,"3 AT","3 AT","23210",2),(1,"T-Mobile A","TMA","23203",0),(1,"T-Mobile A","TMA","23203",2)
= System zeigt die verfügbaren Provider an

= System displays the available providers 

OK
AT+COPS?

AT+COPS?
+COPS: 0,0,"A1",2
OK

##################### REGISTRED IN ROAMING #####################

= System shows if it connects in ROAMING mode 

AT+WIPCFG=1

OK
AT+WIPBR=1,6

OK
AT+WIPBR=2,6,11,"metos.at"

OK
AT+WIPBR=2,6,0,"metos"

OK
AT+WIPBR=2,6,1,"metos"

OK
AT+WIPBR=4,6,0

OK
---- INFO: DOWNLOAD MANAGER STARTS ----
AT+WIPCREATE=5,1,"metos.at",80

OK

+WIPREADY: 5, 1


AT+WIPFILE=5,1,4,"http://metos.at/pikernel_dev/cropview_upload.php?sernum=0720559D&r=1&camid=0&picid=4&dev_id=72&uid=003900293136510832323434","","","Content-Type","multipart/form-data; boundary=pi1AO6GwcvlNV6tacT1cv"

= System starts the transmission to the server 

CONNECT
--pi1AO6GwcvlNV6tacT1cv
Content-Disposition: form-data; name='cropview_comm_info'; filename='0720559D_comm_info.xml'
Content-Type: application/octet-stream

<?xml version='1.0' standalone='yes'?>
<cropview_xml>
<comm_info>
<cropview_info
time='1515599749'
fw='01.107.20170803'
programed='2018.01.09 09:35'
apntbl='3'
ser_num='0720559D'
uid='003900293136510832323434'
name='CropView 2'
dev_id='72'
descr='iScout '
hw='29-0320'


= System sends the info Sn. , FW of the System Type of the system to the server 

.

.

.

OK
---- INFO: Connection close up to the Bearer Start ----
---- INFO: DOWNLOAD MANAGER ENDED ----
AT+WIPBR=5,6

OK
AT+WIPBR=0,6

OK
AT+WIPCFG=0

OK
---- INFO: Data sent successfully. ----
AT+CFUN=0

OK

= System has sent data to the server Transmission is successful.

If the system can not transfer it takes 5 to 10 minutes.
Then copy the LOG from Terminal Program and send it to us via Ticket so we can analyse it.