This article explains when and how to use the calibration option for the PI Wind Direction sensor on METOS 5 and μMETOS devices.
!!! Important Notes !!!
- PI wind direction sensors are factory‑calibrated, and in most cases no user action is required.
- METOS 5 and μMETOS devices provide an additional calibration function for special situations where the sensor must be aligned or re-calibrated typically in situations such as:
Re-installation or repositioning of the sensor
Alignment adjustments after mounting
Site-specific structural influences affecting direction accuracy
- Incorrect wiring may result in sensor malfunction or damage
➡️ If the sensor is properly installed and aligned to true North, re-calibration is generally not necessary.
➡️ The manual is available for download as an attachment below this article.
Need Help?
If you encounter issues during this process or are unsure about the information on this page, please SUBMIT A TICKET to the METOS Support Center.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article