- PC or notebook
- Jumper (Jumper RM2,54)
- USB to Mini USB cable
- Station which is not sending or from which station you would like to create a Log file
- Battery from the station
- A terminal program (Tera term)
Link for Tera Term download:
For more information or help pls read Download Tera Term in our solutions
Please follow these instructions:
Make sure there ist !! NO JUMPER on the motherboard !!
Connect the PC and the motherboard (PCB) with the USB cable
Start the terminal program (Tera Term)
Connect the battery at the station (LEDs start to flash) and select the right COM at Tera Term
then Serial port...
Select the COM (Port) used (1) see image below
Set the baud rate (Speed) to 19200 (2) see image below
The system starts and makes a connetion to the server, this can take up to 10 minutes
If the connection to the server is not built up automatically:
Press the Connect-Button
(At iMETOS boards the Connect-Button is on the PCB at ECO it is outside the housing)
Station start to send to server this can take up to 7 minutes
In this log we see what APN the station use to connect to the internet
To see the Full Report
Put jumper on J1 at PCB
and go to
(2) FULL REPORT
In this report we have the events of the Station from the time when the station could not send
To get the stored Data
Go back to MAIN MENU wit ESC
(E) PRINT ENCODED RECORDS
In this file there are the data of the measurements from the last days
If the data file is OK than we can uploade the date manually to the server that you do not loose the data!
Copy the complete Log file and store it in a TEXT (.txt) or Word File (.docx) send it to us via ticket system. Make sure that the Log file ist complete and no data is missing!