Test the transmission iScout
Connect PC to iScout and plug jumper onto J1
Open terminal program (TeraTerm or PI Service Terminal) and select the correct Com Port
the menu opens
========================================================================================
USER: \ MAIN MENU
========================================================================================
(1) SYSTEM
(2) CONTROL UNIT
(3) MODEM
(5) CAMERA
(6) CAMERA FOCUS
Press Menu (3) MODEM
>> Chosen function: MODEM
========================================================================================
USER: \ MAIN MENU \ MODEM
========================================================================================
(1) MODEM SETTINGS
(2) SEND PHOTO
(3) SEND DATA
(4) GET GPS
(5) GET CONF SMS
(ESC) BACK
Press (3) SEND DATA and remove the jumper from J1
>> Chosen function: SEND DATA
========================================================================================
USER: \ MAIN MENU \ MODEM \ SEND SDATA
========================================================================================
The system now starts a transmission, that takes a few minutes.
================================================================
Modem is starting...
Modem found at BAUD rate: 230400
Manufacturer of modem: Sierra Wireless
Type of modem: SL8084TR Product
Modem firmware version: R7.54
IMEI: 352264060195076
Modem ready to use...
================================================================
AT+STSF?
+STSF: 0,"FBEBFFFF7F0B00573E",12,2
OK
AT&F
OK
AT+WIND=0
OK
AT+WOPEN=0
.
.
.
OK
AT+CCID
+CCID: "89423053017024011130"
OK
##################### SIM CARD IS UNLOCKED #####################
= at the SIM card the PIN query is deactivated
AT+WIND=8
.
.
.
AT+CIMI
295057240301148
############# APN FOUND IN SYSTEM FOR THIS SIM CARD ############
= System has found the APN settings for the SIM card
AT+WMBS?
.
.
.
OK
AT+COPS=?
+COPS: (2,"A1","A1","23201",2),(1,"A1","A1","23201",0),(1,"3 AT","3 AT","23205",2),(1,"3 AT","3 AT","23205",0),(1,"3 AT","3 AT","23210",2),(1,"T-Mobile A","TMA","23203",0),(1,"T-Mobile A","TMA","23203",2)
= System zeigt die verfügbaren Provider an
= System displays the available providers
OK
AT+COPS?
AT+COPS?
+COPS: 0,0,"A1",2
OK
##################### REGISTRED IN ROAMING #####################
= System shows if it connects in ROAMING mode
AT+WIPCFG=1
OK
AT+WIPBR=1,6
OK
AT+WIPBR=2,6,11,"metos.at"
OK
AT+WIPBR=2,6,0,"metos"
OK
AT+WIPBR=2,6,1,"metos"
OK
AT+WIPBR=4,6,0
OK
---- INFO: DOWNLOAD MANAGER STARTS ----
AT+WIPCREATE=5,1,"metos.at",80
OK
+WIPREADY: 5, 1
AT+WIPFILE=5,1,4,"http://metos.at/pikernel_dev/cropview_upload.php?sernum=0720559D&r=1&camid=0&picid=4&dev_id=72&uid=003900293136510832323434","","","Content-Type","multipart/form-data; boundary=pi1AO6GwcvlNV6tacT1cv"
= System starts the transmission to the server
CONNECT
--pi1AO6GwcvlNV6tacT1cv
Content-Disposition: form-data; name='cropview_comm_info'; filename='0720559D_comm_info.xml'
Content-Type: application/octet-stream
<?xml version='1.0' standalone='yes'?>
<cropview_xml>
<comm_info>
<cropview_info
time='1515599749'
fw='01.107.20170803'
programed='2018.01.09 09:35'
apntbl='3'
ser_num='0720559D'
uid='003900293136510832323434'
name='CropView 2'
dev_id='72'
descr='iScout '
hw='29-0320'
= System sends the info Sn. , FW of the System Type of the system to the server
.
.
.
OK
---- INFO: Connection close up to the Bearer Start ----
---- INFO: DOWNLOAD MANAGER ENDED ----
AT+WIPBR=5,6
OK
AT+WIPBR=0,6
OK
AT+WIPCFG=0
OK
---- INFO: Data sent successfully. ----
AT+CFUN=0
OK
= System has sent data to the server Transmission is successful.
If the system can not transfer it takes 5 to 10 minutes.
Then copy the LOG from Terminal Program and send it to us via Ticket so we can analyse it.