How to recall stored data from the station through Terminal Program (TeraTerm or PI Service Terminal): 


To do that, please follow the steps:


  1. Connect the station via USB cable to the PC

  2. Put the jumper on J1

  3. Start the terminal program

  4. Select the correct COM Port

  5. Navigate to the MAIN MENU and then press (2) SENSORS

    ========================================================================================

    USER: \ MAIN MENU

    ========================================================================================

    (1)     SYSTEM

    (2)     SENSORS

    (3)     MODEM

    08/05/2019 15:55:45 >> Chosen function: SENSORS

    ========================================================================================

    USER: \ MAIN MENU \ SENSORS

    ========================================================================================

    (B)     BATTERY STATUS

    (T)     DO SENSOR TEST

    (W)     WIRELESS SYSTEM

    (I)     ACCEPT CONFIGURATION + DO RECORD

    (P)     PRINT LAST MEASURED DATA

    (S)     PRINT LIST OF SUPPORTED SENSORS

    (E)     PRINT ENCODED RECORDS

    (C)     DELETE SENSOR CONFIGURATION

    (R)     DELETE ALL RECORDS

    (D)     DELETE CONFIGURATION + RECORDS

    (Y)     SET ULTRASONIC ZERO WITH CURRENT HEIGHT

    (Z)     SET ULTRASONIC ZERO WITH 2 METERS

    (ESC)   BACK

    08/05/2019 15:55:47 >> Select...



  6. Now, in the SENSORS menu, select the option (E) PRINT ENCODED RECORDS.

    ========================================================================================

    USER: \ MAIN MENU \ SENSORS

    ========================================================================================

    (B)     BATTERY STATUS

    (T)     DO SENSOR TEST

    (W)     WIRELESS SYSTEM

    (I)     ACCEPT CONFIGURATION + DO RECORD

    (P)     PRINT LAST MEASURED DATA

    (S)     PRINT LIST OF SUPPORTED SENSORS

    (E)     PRINT ENCODED RECORDS

    (G)     PRINT ENCODED RECORDS FROM TIME

    (H)     PRINT RECORDS IN HEXADECIMAL

    (C)     DELETE SENSOR CONFIGURATION

    (R)     DELETE ALL RECORDS

    (D)     DELETE CONFIGURATION + RECORDS

    (U)     SETUP INPUTS TIMING

    (Y)     SET ULTRASONIC ZERO WITH CURRENT HEIGHT

    (Z)     SET ULTRASONIC ZERO WITH 2 METERS

    (ESC)   BACK

    29/05/2019 12:35:41 >> Chosen function: PRINT ENCODED RECORDS

    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

    … And so on until the menu appears again:

    O8A8QABk6APBgftCOMI9wgBhAEAAgBiX+M5gNgGhBAnCggcFAGEAQACAFkB4zmA2AaEEicKCFcU

    ========================================================================================

    USER: \ MAIN MENU \ SENSORS

    ========================================================================================


  7. Copy all of this, save it with the serial number of the station and send it to us via Ticket.
    We will upload this later directly to our server.